Publications (2020-2024)

2024

• Djemmah S., Voué M., Madi Y, Allou D., Haddad A. and Bouchafaa H. Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations. Academy Proceedings in Engineering sciences, Vol 49, Article number 243,(2024), Springer.


• Latreche S., Boutarek N., Bencherifa I., Messaoud F. and Trari M. Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chin. J. Chem. Eng., (2024).


• Ortiz-Domínguez M., Keddam M, Morales-Robles Á.J Characterization and boron diffusion modelling on the AISI H13 steel. J. Min. Metall. B: Metall., Vol.(60)3 353-365, (2024).


• Sari A., Keddam M., Ouanezar A., Malki A. Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO₂-15mol% Y₂O₃, P.A.C. (18)4, (2024).


• Boumaali B. and Keddam M. Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Prot. Met. Phys. Chem. Surf., (60), (2024).


• Khater M.A., Mebarek B., Bouaziz S.A., Keddam M., El Guerri Y. Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti₆Al₄V) obtained by Liquid Boriding Process, Kovove Materialy, (62), (2024).


• Orihel P., Ptačinová J., Gogola P., Keddam M., Jurči P. Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, (66)1, (2024).


• Türkmen İ and Keddam M. Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization (213)113995, (2024).


• Ortiz–Domínguez M. and Keddam M. Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing(66)3, (2024).


• Ortiz-Domínguez M. and Keddam M. Diffusion Kinetics and Characterization of Fe₂B Coatings Grown Thermochemically on Steel ASTM A709, Met. Sci. Heat Treat., (65)9, (2024).


• EL GUERRI Y., MEBAREK B. and KEDDAM M. Confrontation of linear versus nonlinear approach in Fe₂B boride layer thickness predictions, Materials Protection, (65)1, (2024).


• HADJADJ N., MEBAREK B., EL GUERRI Y. and KEDDAM M. Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel, Materials Protection, (65)2, (2024).



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).


• Lakreb, N., Şen, U., Toussaint, E., Amziane, S., Djakab, E.,  Pereira, H. Physical properties and thermal conductivity of cork-based sandwich panels for building insulation. Construction and Building Materials, 368, 130420, (2023).


• Djemmah, S., Madi, Y., Voué, M., Haddad, A., Allou, D., Ouallam, S., and Rezzoug, A. Effect of Mg Addition on the Morphology, Roughness and Adhesion of Cr Chromized layer Produced by pack Cementation. International Journal of Engineering (In Press), (2023).


• Anas Boussaa S., Benfadel K., Trad Khodja A., Ayachi M., Boulil R., Bekhedda K., Talbi L., Boukezzata A., Ouadah Y., Allam D., Maifi L., Keffous A., Chetoui A., Torki C., Boudeffar F., Achacha S., Manseri A., Zaourar-Boutarek N. and Kaci S.Elaboration and Characterization of Amorphous Silicon Carbide Thin Films (a-SiC) by Sputerring Magnetron Technique for Photoelectrochemical CO₂ Conversion. Silicon, 15(3), 1145-1157, (2023).


• M. O. Azzoug, B. Mahfoud , Hibet. E. Mahfoud, Influence of External Magnetic Field on 3D Thermocapillary Convective Flow in Various Thin Annular Pools Filled with Silicon Melt. Journal of Applied Fluid Mechanics, 16(9):1853-1864, (2023).


• Mahfoud B., Azzoug M. O. MHD effect on the thermocapillary silicon melt flow in various annular enclosures. Crystal Research and Technology, 2300025, (2023).


• Ortiz-Domínguez M., Keddam M., Modelling boron diffusion for Fe₂B layer formation: comparative kinetics analysis in pack-boronized AISI 4147 steel. Materials Testing, (0) (2023).


• Keddam, M., Ortiz-Domínguez, M., Cruz-Avilés, A., Morgado-González, I., Gómez-Vargas O. A., Cardoso-Legorreta E., Zuno-Silva J. Kinetics of Formation, Metallurgical and Tribological Properties of Iron Boride Surface Layer on Steel ASTM A572. Metal Science and Heat Treatment (65), 74–81, (2023).


• Benyakoub, K., Keddam, M., Boumaali, B., Kulka, M. Kinetic Modelling of Powder-Pack Boronized Cr₅MoSiV1 Steel by Two Distinct Approaches. Coatings, 13(6), 1132, (2023).


• Orihel, P., Jurči, P., Keddam, M. Characterizations and Kinetic Modelling of Boride Layers on Bohler K190 Steel. Coatings, 13(6), 1000, (2023).


• Ortiz-Domínguez, M., & Keddam, M. Solid Boronizing of AISI 420 Steel: Characterizations and Kinetics Modelling. Protection of Metals and Physical Chemistry of Surfaces (59), 206–219, (2023)


• Ptačinová, J., Gabalcová, Z., Ďurica, J., Drienovský, M., Keddam, M., & Jurči, P. Characterization of dual phase boride coatings on Sverker 3 steel and simulation of boron diffusion. Materials Testing, 65(4), 578-592, (2023).


• Castillo-Vela, L. E., Mejía-Caballero, I., Rosales-Lopez, J. L., Olivares-Luna, M., Contreras-Hernández, A., Keddam, M., Campos-Silva, I. The influence of a pulsed-DC field on the growth of the Fe₂B layer and the electrical behavior of the boriding media. Vacuum, (210), 111846, (Avril 2023)


• Arslan-Kaba, M., Karimzadehkhoei, M., Keddam, M., Timur, S., Sireli, G. K. Solid Boronizing of AISI 420 Steel: Characterizations and Kinetics Modelling. Materials Chemistry and Physics, 302, 127735, (2023).


• Orihel, P., Drienovský, M., Gabalcová, Z., Jurči, P., Keddam, M. Characterization and boron diffusion kinetics on the surface-hardened layers of Royalloy steel. Coatings, 13(1), 113, (2023).
• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).
• Günen, A., Keddam, M., Erdoğan, A., Karakaş, M. S. Pack-Boriding of Monel 400: Microstructural Characterization and Boriding Kinetics. Metals and Materials International, 28(8), 1851-1863, (2022).


• Achour, S., Amokrane, S., Chegrouche, S., Guedioura, B., Nibou, D. Adsorption Mechanism Study of Radionuclide ⁶⁰Co by Purified and α-Fe₂O₃-Supported Bentonite from Radioactive Solution. Arabian Journal for Science and Engineering, (47), 5629–5645, (2022).


• Boussaa, S. A., Benkrid, A., Ayachi, M., Zaourar-Boutarek, N., Birane, M. Silica crucible coating based on silicon nitride ceramic: properties characterization. Emerging Materials Research, (11)-1, 7-11, (2022).



2021

• Achour, S., Amokrane, S., Chegrouche, S., Nibou, D., Baaloudj, O. Artificial neural network modeling of the hexavalent uranium sorption onto chemically activated bentonite. Research on Chemical Intermediates, 47(11), 4837-4854, (2021).


• Benzerafa, A., Amokrane, S., Boulaouche, T., Nibou, D., Trari, M. Synthesis of novel conducting polyaniline composites based on seaweed Enteromorpha compressa macro-alga powder. Polymer Bulletin, 78(4), 1909-1924, (2021).


• Laib, R., Amokrane, S., Dahdouh, N., Mansouri, T. E. M., Rekhila, G., Trari, M., Nibou, D. Removal of the cationic textile dye by Recycled newspaper pulp and its cellulose microfibers extracted: characterization, release, and adsorption studies. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 40(1), 133-141, (2021).


• Mekatel, E., Dahdouh, N., Amokrane, S., Nibou, D., Trari, M. Removal of Maxilon Red Dye by Adsorption and Photocatalysis: Optimum Conditions, Equilibrium, and Kinetic Studies. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 40(1), 93-110, (2021).


• Mohammed, M. T. E., Nibou, D., Mohamed, T., Amokrane, S. Study of the adsorption of an organic pollutant onto a microporous metal organic framework. Water Science and Technology, 83(1), 137-151, (2021).


• Nibou, D., Amokrane, S.Mechanism of Cu²⁺ ions uptake process by synthetic NaA zeolite from aqueous solution: Characterization, Kinetic, intra-crystalline diffusion and thermodynamic studies. Journal of Molecular Liquids, 323, 114642, (2021).


• Sebati, F., Nibou, D., Amokrane, S. Comparative study of the adsorption and photo-reduction of hexavalent chromium onto AlPO₄-11 and SAPO-31 substituted Fe₂O₃ from aqueous solutions: Synthesis, characterization, kinetic and thermodynamic studies. Separation Science and Technology, 56(12), 2011-2025, (2021).


• Zouaoui H., Nibou D. and Wan Azlina Wan A.K.G. and Amokrane S.High-Pressure CO₂ Adsorption onto NaX Zeolite: Effect of Li⁺, K⁺, Mg²⁺ and Zn²⁺ and Equilibrium Isotherms Study. Iran. J. Chem. Chem. Eng., 40(4), (2021).


• Keddam, M., Jurči, P. Alternative Kinetic Model of Growth of Boride Layers on Steel AISI 316. Metal Science and Heat Treatment, 63(7), 430-436, (2021).


• Boumaali, B., Nait Abdellah, Z., Keddam, M. Computer simulation of boronizing kinetics for a TB₂ alloy. Materials Testing, 63(12), 1130-1135, (2021).


• Nait Abdellah, Z., Boumaali, B., Keddam, M. Experimental evaluation and modelling of the boronizing kinetics of AISI H13 hot work tool steel. Materials Testing, 63(12), 1136-1141, (2021).


• Mebarek, B., Keddam, M., Kulka, M. Simulation of the incubation time for the formation of (FeB/Fe₂B) bilayer on pure iron. Koroze a ochrana materialu, 65(2), 49-56, (2021).


• Keddam, M., Topuz, P., Aydin, Ö. Simulation of boronizing kinetics of AISI 316 steel with an integral diffusion model. Materials Testing, 63(10), 906-912, (2021).


• Makuch, N., Dziarski, P., Kulka, M., Keddam, M. Growth Kinetics and Some Mechanical Properties of Plasma Paste Borided Layers Produced on Nimonic 80A-Alloy. Materials, 14(18), 5146, (2021).


• Boumaali, B., Nait Abdellah, Z., Keddam, M. Characterization of bilayer (FeB/Fe₂B) on AISI H13 work tool steel. Koroze a ochrana materialu, 65(2), 40-48, (2021).


• Keddam, M., Jurči, P. Integral Diffusion Model of the Kinetics of Growth of Nitrided Layer in Gas Nitriding of Armco Iron. Metal Science and Heat Treatment, 63(3), 148-155, (2021).


• Kouba, R., Keddam, M., Kulka, M. Simulation of the Growth Kinetics of CoB and Co₂B Layers on Alloy ASTM F-75. Metal Science and Heat Treatment, 63(1), 106-113, (2021).


• Contla-Pacheco, A. D., Keddam, M., Lartundo-Rojas, L., Ortega-Aviles, M., Mejía-Caballero, I., Campos-Silva, I. Application of the Heat Balance Integral Method to the growth kinetics of nickel boride layers on an Inconel 718 superalloy. Surface and Coatings Technology, 420, 127355, (2021).


• Nait Abdellah, Z., Keddam, M., Jurči, P. Simulation of boronizing kinetics of ASTM A36 steel with the alternative kinetic model and the integral method. Koroze a Ochrana materiálu, 65(1), 33-39, (2021).


• Keddam, M., & Jurči, P. Simulating the Growth of Dual-Phase Boride Layer on AISI M2 Steel by Two Kinetic Approaches. Coatings, 11(4), 433, (2021).


• Azouani, O., Keddam, M., Allaoui, O., Sehisseh, A. Kinetic Analysis of pack-borided gray cast iron. Materials Performance and Characterization, 10(1), 226-236, (2021).


• Mekatel, E., Dahdouh, N., Amokarane, S., Nibou, D., Trari, M. Removal of Maxilon Red Dye by Adsorption and Photocatalysis: Optimum Conditions, Equilibrium, and Kinetic Studies. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 40(1), 93-110, (2021).

2020

• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).

2024

• Djemmah S., Voué M., Madi Y, Allou D., Haddad A. and Bouchafaa H. Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations. Academy Proceedings in Engineering sciences, Vol 49, Article number 243,(2024), Springer.


• Latreche S., Boutarek N., Bencherifa I., Messaoud F. and Trari M. Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chin. J. Chem. Eng., (2024).


• Ortiz-Domínguez M., Keddam M, Morales-Robles Á.J Characterization and boron diffusion modelling on the AISI H13 steel. J. Min. Metall. B: Metall., Vol.(60)3 353-365, (2024).


• Sari A., Keddam M., Ouanezar A., Malki A. Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO₂-15mol% Y₂O₃, P.A.C. (18)4, (2024).


• Boumaali B. and Keddam M. Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Prot. Met. Phys. Chem. Surf., (60), (2024).


• Khater M.A., Mebarek B., Bouaziz S.A., Keddam M., El Guerri Y. Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti₆Al₄V) obtained by Liquid Boriding Process, Kovove Materialy, (62), (2024).


• Orihel P., Ptačinová J., Gogola P., Keddam M., Jurči P. Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, (66)1, (2024).


• Türkmen İ and Keddam M. Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization (213)113995, (2024).


• Ortiz–Domínguez M. and Keddam M. Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing(66)3, (2024).


• Ortiz-Domínguez M. and Keddam M. Diffusion Kinetics and Characterization of Fe₂B Coatings Grown Thermochemically on Steel ASTM A709, Met. Sci. Heat Treat., (65)9, (2024).


• EL GUERRI Y., MEBAREK B. and KEDDAM M. Confrontation of linear versus nonlinear approach in Fe₂B boride layer thickness predictions, Materials Protection, (65)1, (2024).


• HADJADJ N., MEBAREK B., EL GUERRI Y. and KEDDAM M. Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel, Materials Protection, (65)2, (2024).



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).


• Lakreb, N., Şen, U., Toussaint, E., Amziane, S., Djakab, E.,  Pereira, H. Physical properties and thermal conductivity of cork-based sandwich panels for building insulation. Construction and Building Materials, 368, 130420, (2023).


• Djemmah, S., Madi, Y., Voué, M., Haddad, A., Allou, D., Ouallam, S., and Rezzoug, A. Effect of Mg Addition on the Morphology, Roughness and Adhesion of Cr Chromized layer Produced by pack Cementation. International Journal of Engineering (In Press), (2023).


• Anas Boussaa S., Benfadel K., Trad Khodja A., Ayachi M., Boulil R., Bekhedda K., Talbi L., Boukezzata A., Ouadah Y., Allam D., Maifi L., Keffous A., Chetoui A., Torki C., Boudeffar F., Achacha S., Manseri A., Zaourar-Boutarek N. and Kaci S.Elaboration and Characterization of Amorphous Silicon Carbide Thin Films (a-SiC) by Sputerring Magnetron Technique for Photoelectrochemical CO₂ Conversion. Silicon, 15(3), 1145-1157, (2023).


• M. O. Azzoug, B. Mahfoud , Hibet. E. Mahfoud, Influence of External Magnetic Field on 3D Thermocapillary Convective Flow in Various Thin Annular Pools Filled with Silicon Melt. Journal of Applied Fluid Mechanics, 16(9):1853-1864, (2023).


• Mahfoud B., Azzoug M. O. MHD effect on the thermocapillary silicon melt flow in various annular enclosures. Crystal Research and Technology, 2300025, (2023).


• Ortiz-Domínguez M., Keddam M., Modelling boron diffusion for Fe₂B layer formation: comparative kinetics analysis in pack-boronized AISI 4147 steel. Materials Testing, (0) (2023).


• Keddam, M., Ortiz-Domínguez, M., Cruz-Avilés, A., Morgado-González, I., Gómez-Vargas O. A., Cardoso-Legorreta E., Zuno-Silva J. Kinetics of Formation, Metallurgical and Tribological Properties of Iron Boride Surface Layer on Steel ASTM A572. Metal Science and Heat Treatment (65), 74–81, (2023).


• Benyakoub, K., Keddam, M., Boumaali, B., Kulka, M. Kinetic Modelling of Powder-Pack Boronized Cr₅MoSiV1 Steel by Two Distinct Approaches. Coatings, 13(6), 1132, (2023).


• Orihel, P., Jurči, P., Keddam, M. Characterizations and Kinetic Modelling of Boride Layers on Bohler K190 Steel. Coatings, 13(6), 1000, (2023).


• Ortiz-Domínguez, M., & Keddam, M. Solid Boronizing of AISI 420 Steel: Characterizations and Kinetics Modelling. Protection of Metals and Physical Chemistry of Surfaces (59), 206–219, (2023)


• Ptačinová, J., Gabalcová, Z., Ďurica, J., Drienovský, M., Keddam, M., & Jurči, P. Characterization of dual phase boride coatings on Sverker 3 steel and simulation of boron diffusion. Materials Testing, 65(4), 578-592, (2023).


• Castillo-Vela, L. E., Mejía-Caballero, I., Rosales-Lopez, J. L., Olivares-Luna, M., Contreras-Hernández, A., Keddam, M., Campos-Silva, I. The influence of a pulsed-DC field on the growth of the Fe₂B layer and the electrical behavior of the boriding media. Vacuum, (210), 111846, (Avril 2023)


• Arslan-Kaba, M., Karimzadehkhoei, M., Keddam, M., Timur, S., Sireli, G. K. Solid Boronizing of AISI 420 Steel: Characterizations and Kinetics Modelling. Materials Chemistry and Physics, 302, 127735, (2023).


• Orihel, P., Drienovský, M., Gabalcová, Z., Jurči, P., Keddam, M. Characterization and boron diffusion kinetics on the surface-hardened layers of Royalloy steel. Coatings, 13(1), 113, (2023).
• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).
• Günen, A., Keddam, M., Erdoğan, A., Karakaş, M. S. Pack-Boriding of Monel 400: Microstructural Characterization and Boriding Kinetics. Metals and Materials International, 28(8), 1851-1863, (2022).


• Achour, S., Amokrane, S., Chegrouche, S., Guedioura, B., Nibou, D. Adsorption Mechanism Study of Radionuclide ⁶⁰Co by Purified and α-Fe₂O₃-Supported Bentonite from Radioactive Solution. Arabian Journal for Science and Engineering, (47), 5629–5645, (2022).


• Boussaa, S. A., Benkrid, A., Ayachi, M., Zaourar-Boutarek, N., Birane, M. Silica crucible coating based on silicon nitride ceramic: properties characterization. Emerging Materials Research, (11)-1, 7-11, (2022).



2021

• Achour, S., Amokrane, S., Chegrouche, S., Nibou, D., Baaloudj, O. Artificial neural network modeling of the hexavalent uranium sorption onto chemically activated bentonite. Research on Chemical Intermediates, 47(11), 4837-4854, (2021).


• Benzerafa, A., Amokrane, S., Boulaouche, T., Nibou, D., Trari, M. Synthesis of novel conducting polyaniline composites based on seaweed Enteromorpha compressa macro-alga powder. Polymer Bulletin, 78(4), 1909-1924, (2021).


• Laib, R., Amokrane, S., Dahdouh, N., Mansouri, T. E. M., Rekhila, G., Trari, M., Nibou, D. Removal of the cationic textile dye by Recycled newspaper pulp and its cellulose microfibers extracted: characterization, release, and adsorption studies. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 40(1), 133-141, (2021).


• Mekatel, E., Dahdouh, N., Amokrane, S., Nibou, D., Trari, M. Removal of Maxilon Red Dye by Adsorption and Photocatalysis: Optimum Conditions, Equilibrium, and Kinetic Studies. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 40(1), 93-110, (2021).


• Mohammed, M. T. E., Nibou, D., Mohamed, T., Amokrane, S. Study of the adsorption of an organic pollutant onto a microporous metal organic framework. Water Science and Technology, 83(1), 137-151, (2021).


• Nibou, D., Amokrane, S.Mechanism of Cu²⁺ ions uptake process by synthetic NaA zeolite from aqueous solution: Characterization, Kinetic, intra-crystalline diffusion and thermodynamic studies. Journal of Molecular Liquids, 323, 114642, (2021).


• Sebati, F., Nibou, D., Amokrane, S. Comparative study of the adsorption and photo-reduction of hexavalent chromium onto AlPO₄-11 and SAPO-31 substituted Fe₂O₃ from aqueous solutions: Synthesis, characterization, kinetic and thermodynamic studies. Separation Science and Technology, 56(12), 2011-2025, (2021).


• Zouaoui H., Nibou D. and Wan Azlina Wan A.K.G. and Amokrane S.High-Pressure CO₂ Adsorption onto NaX Zeolite: Effect of Li⁺, K⁺, Mg²⁺ and Zn²⁺ and Equilibrium Isotherms Study. Iran. J. Chem. Chem. Eng., 40(4), (2021).


• Keddam, M., Jurči, P. Alternative Kinetic Model of Growth of Boride Layers on Steel AISI 316. Metal Science and Heat Treatment, 63(7), 430-436, (2021).


• Boumaali, B., Nait Abdellah, Z., Keddam, M. Computer simulation of boronizing kinetics for a TB₂ alloy. Materials Testing, 63(12), 1130-1135, (2021).


• Nait Abdellah, Z., Boumaali, B., Keddam, M. Experimental evaluation and modelling of the boronizing kinetics of AISI H13 hot work tool steel. Materials Testing, 63(12), 1136-1141, (2021).


• Mebarek, B., Keddam, M., Kulka, M. Simulation of the incubation time for the formation of (FeB/Fe₂B) bilayer on pure iron. Koroze a ochrana materialu, 65(2), 49-56, (2021).


• Keddam, M., Topuz, P., Aydin, Ö. Simulation of boronizing kinetics of AISI 316 steel with an integral diffusion model. Materials Testing, 63(10), 906-912, (2021).


• Makuch, N., Dziarski, P., Kulka, M., Keddam, M. Growth Kinetics and Some Mechanical Properties of Plasma Paste Borided Layers Produced on Nimonic 80A-Alloy. Materials, 14(18), 5146, (2021).


• Boumaali, B., Nait Abdellah, Z., Keddam, M. Characterization of bilayer (FeB/Fe₂B) on AISI H13 work tool steel. Koroze a ochrana materialu, 65(2), 40-48, (2021).


• Keddam, M., Jurči, P. Integral Diffusion Model of the Kinetics of Growth of Nitrided Layer in Gas Nitriding of Armco Iron. Metal Science and Heat Treatment, 63(3), 148-155, (2021).


• Kouba, R., Keddam, M., Kulka, M. Simulation of the Growth Kinetics of CoB and Co₂B Layers on Alloy ASTM F-75. Metal Science and Heat Treatment, 63(1), 106-113, (2021).


• Contla-Pacheco, A. D., Keddam, M., Lartundo-Rojas, L., Ortega-Aviles, M., Mejía-Caballero, I., Campos-Silva, I. Application of the Heat Balance Integral Method to the growth kinetics of nickel boride layers on an Inconel 718 superalloy. Surface and Coatings Technology, 420, 127355, (2021).


• Nait Abdellah, Z., Keddam, M., Jurči, P. Simulation of boronizing kinetics of ASTM A36 steel with the alternative kinetic model and the integral method. Koroze a Ochrana materiálu, 65(1), 33-39, (2021).


• Keddam, M., & Jurči, P. Simulating the Growth of Dual-Phase Boride Layer on AISI M2 Steel by Two Kinetic Approaches. Coatings, 11(4), 433, (2021).


• Azouani, O., Keddam, M., Allaoui, O., Sehisseh, A. Kinetic Analysis of pack-borided gray cast iron. Materials Performance and Characterization, 10(1), 226-236, (2021).


• Mekatel, E., Dahdouh, N., Amokarane, S., Nibou, D., Trari, M. Removal of Maxilon Red Dye by Adsorption and Photocatalysis: Optimum Conditions, Equilibrium, and Kinetic Studies. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 40(1), 93-110, (2021).

2020

• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).